-
Your cart is currently empty.
If you're looking for a safe, effective way to keep your dog contained, a wireless dog fence is a great option. In this article, we'll show you step-by-step how to install a wireless dog fence in your home.
If you want to know what is wireless dog fence(dog shock collar), you can check it on wikipedia:
A pet fence or fenceless boundary is an electronic system designed to keep a pet or other domestic animal within a set of predefined boundaries without the use of a physical barrier. A mild electric shock is delivered by an electronic collar if its warning sound is ignored. The system was first invented and patented by Richard Peck in 1973.
When it comes to finding a location for your transmitter, there are a few things you'll want to keep in mind.
First, you'll want to make sure the transmitter is placed in a location that is dry and free of debris. Secondly, you'll want to find a location that is away from any electronic devices or appliances that could interfere with the signal.
When deciding where to place your transmitter, there are a few things you'll need to take into account. The first is the size of your yard. The transmitter needs to be placed in a central location so that the entire area is covered by the signal. If you have a large yard, you may need to purchase an extra transmitter or two in order to get full coverage.
Another thing to consider is the layout of your yard. If you have a lot of trees or other obstacles, they can interfere with the signal and cause it to be weaker in certain areas. You'll need to experiment a bit to find the best location for your particular setup.
Once you've found the perfect spot for your transmitter, it's time to install it. Make sure you follow the instructions that came with your system carefully. If you're not comfortable doing the installation yourself, there are plenty of professional fence companies that would be happy to do it for you.
The first step to installing a wireless dog fence is to activate the signal receiver collar. This is done by charging the collar and then placing it on your dog. The collar will emit a signal that will be picked up by the wireless fence transmitter. Once the signal is received, the transmitter will send a signal back to the collar, activating it.
The first step in installing a wireless dog fence is to determine the size of the containment area. The size of the containment area will determine the radius of the fence. The radius is the distance from the transmitter to the outer edge of the containment area. The typical range for a wireless dog fence is between 10 and 30 feet.
Once you have determined the radius of your containment area, you will need to mark the outer edge of the fence with flags or stakes. This will help you to visualize the size of your containment area and ensure that it is large enough for your dog to roam freely.
If you have any questions about setting the radius of your wireless dog fence, please consult your user manual or contact the manufacturer for assistance.
The correction level is the amount of static electricity that is emitted from the fence wire when your dog gets too close. It is important to start with a low level and increase it gradually until you find the level that deters your dog from going near the boundary without causing them any discomfort.
To set the correction level, start with the transmitter turned off. Then, attach the collar to your dog and turn on the transmitter. Once the transmitter is on, slowly turn up the correction level until you see your dog react. They may yelp or try to back away from the boundary. As soon as you see them react, stop increasing the level and leave it at that setting.
It is important to note that all dogs are different and will require different levels of correction. Some dogs may only need a very low setting while others may need a higher one. It is also important to remember that puppies will require a lower setting than adult dogs.
If you are unsure about what level to set the correction at, it is always best to err on the side of caution and start with a lower setting. You can always increase it if necessary.
Wireless dog fences are a great way to keep your furry friend safe and secure in your yard. But before you can enjoy the benefits of a wireless fence, you need to take some time to train your dog on how to use it. Luckily, training your dog to use a wireless fence is a relatively easy process - and we've got all the tips and tricks you need right here.
The first step in training your dog to use a wireless fence is to plant the training flags. These flags will show your dog where the boundary of the fence is, and help them understand that they need to stay within that boundary. You'll want to place the flags around the perimeter of your yard, about 6-8 feet apart. Once the flags are in place, it's time to start training.
The best way to train your dog on a wireless fence is with positive reinforcement.
Every time they stay within the boundary of the fence, give them a treat or some verbal praise. This will help them understand that they are doing something good - and that they should continue doing it. If they happen to venture outside of the boundary, simply guide them back inside and give them another treat.
1. Hang the transmitter box on a nail or screw in the desired location.
2. Be sure that the transmitter is at least 5 feet off the ground and away from any metal objects or electrical outlets.
3. Once the transmitter is hung, plug it into an outlet using the provided power cord.
4. The green light on the front of the transmitter should come on, indicating that it is receiving power and is working properly.
You've decided to install a wireless dog fence, congratulations! This is a great way to keep your furry friend safe while giving them the freedom to roam. But before you can enjoy the benefits of your new fence, you need to train your dog on how to use it.
Here are some tips on how to train your dog to use a wireless dog fence:
1. Start by teaching your dog the basic commands, such as sit, stay, and come. This will help them understand what you expect of them when they're near the fence.
2. Next, introduce your dog to the boundary flags. Show them that they need to stay within the flags or they will get a correction from the collar.
3. Once your dog understands the boundary flags, it's time to turn on the fence. Let them explore the perimeter and get used to the sensation of the correction.
4. Finally, continue working with your dog on obedience commands and reinforce good behavior near the fence with treats or praise. With a little patience and training, your dog will be safe and happy using their new wireless fence!
Our products including 4 types wireless dog fence system:
If you want to know more about wireless dog fences, you can check our blogs to get more information about dog shock collar:
